Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateTrusted Gate Repair for New York Homeowners
A gate that won’t open in New York isn’t an inconvenience, it’s a car stuck in the driveway, a delivery left on the sidewalk, and a property that’s suddenly harder to secure. Portcullis Gate Repair New York has fixed thousands of residential and commercial gates across the five boroughs since 2008, and we answer the phone with a live person around the clock. Most repairs get a same-day or next-day arrival window, and every job starts with a written price before any work begins. Dean Prescott leads our New York team with a simple rule: quote the real number first, show up when we say we will, and put the guarantee in writing. Call (845) 259-0242 for a free estimate on any Automatic Gate Repair in New York, NY.
Driveway Gate Repair
Driveway Gate Repair is what we do most often in New York, and it usually comes down to one of three failures: the actuator (the motorized arm that physically pushes the gate open) has stripped out, a hinge has sagged from years of weather and weight, or the control board has stopped talking to the remote. Most driveway gate repairs in New York run between $225 and $650 depending on what failed, and we’ll tell you the number before we touch a single bolt. Portcullis Gate Repair New York services LiftMaster, FAAC, BFT, and Linear operators on-site, so the technician arriving at your driveway already knows your system.
Actuator and Operator Repairs
When a driveway gate groans, moves halfway, or just hums without opening, the actuator or operator is the first place we look. A worn actuator on a New York driveway gate typically needs a swap-out, which usually runs $325 to $550 with parts and labor. We carry common replacement components for LiftMaster and FAAC units on the truck, which means fewer second visits.
Hinge, Post, and Alignment Work
New York’s freeze-thaw cycles are brutal on gate posts and hinges. Concrete heaves, posts lean, and suddenly the gate drags on the driveway. We re-shim, re-set, or re-weld the hardware, and most Hinge & Post Repair and alignment work runs $180 to $350.
Styles & brands we work with
Gate Welding
Gate Welding is the fix when a crack, clean break, or rust-through means patching won’t hold. On New York iron and steel gates, the bottom rail and hinge-side stiles are the usual fail points, because that’s where water sits and weight concentrates. Portcullis Gate Repair New York sends a certified welder to the property, and most gate welding repairs in New York run $200 to $600 depending on the length of the crack and how much grinding and refinishing follows. We price the whole job upfront, weld, grind smooth, and paint the repair seam so it doesn’t rust in the next New York winter.
Crack and Fracture Welding
Small cracks in steel or iron gates grow fast once New York road salt gets into them. We V-groove the crack, weld it full penetration, and grind it flush. A straightforward crack repair on a steel gate typically runs $200 to $350.
Structural Reinforcing and Rust Repair
When the bottom rail of a gate has rusted through, welding a patch over it just moves the weak point. We cut out the rotted section, weld in new steel or iron, and reinforce the joint plate, a job that typically runs $350 to $600 on New York driveway gates.
Commercial Gate Repair
Commercial Gate Repair is what keeps apartment buildings, parking garages, and delivery yards in New York operating without a gate stuck open at 2 a.m. A failed commercial gate on a New York property means a security gap, a liability exposure, and a tenant complaint line that lights up by morning. Portcullis Gate Repair New York handles operators, safety loops, photo eyes, and structural repairs on commercial gates, with most service calls in New York running $325 to $900 depending on the gate size and operator type. We carry components for FAAC, BFT, LiftMaster, and Linear commercial operators, and we answer the phone 24/7 because commercial gates never fail at noon.
Operator and Access Repair
Commercial gate operators open and close hundreds of times a week, so circuit boards, limit switches, and capacitors wear out with arithmetic certainty. We diagnose on-site, quote the part in writing, and typically have commercial operators running again within one visit. Most operator repairs on New York commercial gates run $350 to $700.
Safety System and Loop Repair
Commercial gates in New York must have working photo eyes and vehicle detection loops. When a gate starts closing on cars or refuses to close at all, the loop or photo eye is usually dying. We test, trace, and replace these components, with most safety system repairs running $250 to $500.
Iron Gate Repair
Iron Gate Repair in New York is usually about two things: rust and sag. Wrought and cast iron gates hold up for decades, but New York humidity and road salt find every unsealed seam eventually. Portcullis Gate Repair New York repairs broken pickets, re-welds cracked frame joints, re-seats sagging hinges, and repaints the repair area to match. Most iron gate repairs in New York run $225 to $500, and we quote it before we start. Our welders have worked on New York brownstone and townhouse iron gates for nearly two decades, so we know how to match both the metal and the finish.
Picket and Scroll Repair
When a picket snaps or a decorative scroll breaks loose, the fix is part welding and part art. We straighten or replace the damaged pieces, weld them true to the original lines, and paint the seam. Picket repair on an iron gate in New York typically runs $180 to $350.
Sag and Hinge Restoration
An iron gate that scrapes the ground has usually pulled its hinges out of the post, or the frame itself has spread. We Gate Realignment by re-setting or replacing hinges and adding gussets where the frame has fatigued. Sag restoration on a New York iron gate typically runs $250 to $500.
Sliding Gate Repair
Sliding Gate Repair is common in New York because space is tight and rolling gates save every square foot. When a sliding gate jumps the track, screams along the rail, or just won’t move, the problem is usually in the V-wheels, the track, or the motor’s gearbox. Portcullis Gate Repair New York repairs cantilever and tracked sliding gates, and most sliding gate repairs in New York run $250 to $700 depending on whether we’re replacing wheels, repairing track, or rebuilding the drive. We diagnose the whole rail assembly, not just the visible break, because a bent roller bracket will kill a new wheel in a week.
Track and Roller Repair
New York sliding gates pick up gravel, leaves, and street debris that grinds rollers flat in a season or two. We replace flat or seized rollers, align the rail, and clean the track channel. Most roller and track repairs on New York sliding gates run $250 to $450.
Motor and Gearbox Repair
When the motor runs but the gate doesn’t move, the gearbox or sprocket has usually stripped. We open the drive unit, replace the failed gear, and test the full travel. Sliding gate motor and gearbox work in New York typically runs $350 to $700.
Wrought Iron Gate Repair
Wrought Iron Gate Repair is the specialty work that New York’s older homes and landmark buildings need, and it’s different from patching steel. Real wrought iron is fibrous, not crystalline, so it welds differently, and repair pieces need to match the original profile or the gate looks patched forever. Portcullis Gate Repair New York repairs, re-welds, and re-paints wrought iron gates on brownstones in Brooklyn Heights, the Upper West Side, and Manhattan, with most repairs running $250 to $550. We quote every wrought iron job in writing before any work starts, because the material is unforgiving and surprises are expensive.
Ornamental and Scroll Reconstruction
Decorative scrolls and finials on wrought iron gates snap where the metal is thinnest, usually from years of river air and freeze cycles. We fabricate matching pieces, weld them in, and age the finish so the repair disappears into the original gate. Ornamental reconstruction typically runs $300 to $550.
Hinge and Frame Strapping
Wrought iron gates on old New York buildings often hang on original hinges that have wallowed out the post holes over 80 years. We re-drill, bush, and strap the hinge point so the gate hangs true again. This work typically runs $250 to $450 per hinge point.
Metal Gate Repair
Metal Gate Repair covers the broad middle of the trade in New York: steel, aluminum, and hollow-frame gates that don’t need the specialty attention of wrought iron but still fail in predictable ways. The most common calls we get are for broken welds on steel drive gates, corroded frames on aluminum pedestrian gates, and latch hardware that has seized from salt air. Portcullis Gate Repair New York fixes all of it, and most metal gate repairs in New York run $200 to $500. We bring steel, aluminum, and stainless fasteners on every truck, and we quote the repair in writing before we start.
Welded Steel Frame Repair
Hollow steel gate frames crack at the corners first, where the welds take the most stress and water pools inside. We weld the crack, drill a small weep hole so water drains, and seal the repair. Steel frame repair on a New York metal gate typically runs $200 to $400.
Latch and Lock Hardware Replacement
New York metal gates see thousands of open-close cycles a year, and the latch is always the first casualty. We replace seized or broken latch hardware and keyed locks, plus Lock Repair, aligning the strike plate so the gate actually closes securely. Latch replacement typically runs $150 to $250.
Wood Gate Repair
Wood Gate Repair in New York is less about welding and more about structure: posts that have rotted at ground level, rails pulling out of the stiles, and hinges screwed into wet wood that won’t hold. New York’s humid summers and wet winters are a long test of any wood gate. Portcullis Gate Repair New York replaces rotted posts, repairs split rails, re-hangs sagging gates, and swaps out corroded hardware with stainless steel, and most wood gate repairs in New York run $200 to $450. We quote the job in writing, and we use pressure-treated or cedar stock so the repair outlasts the next several seasons.
Post Replacement and Setting
A wood gate that won’t stay latched almost always has a rotted post leaning away from the gate. We cut the post at ground level, remove the old concrete footing, and set a new post in gravel and concrete. Post replacement on a New York wood gate typically runs $200 to $350 per post.
Rail, Pickup, and Hardware Repair
When rails split and hinge screws strip out, we repair or sister the rail and move the hinge location to solid wood, then re-hang the gate true. Most rail and hardware work on New York wood gates runs $180 to $300.
See the difference
Before
After
Before
After
Before
AfterBrands We Service
Portcullis Gate Repair New York technicians are trained on LiftMaster, FAAC, BFT, and Linear operators, plus five other major gate-operator brands. LiftMaster units are the most common we see on New York residential driveways, and we stock their OEM circuit boards, remote receivers, and gear kits on our trucks. When a LiftMaster opener fails in Murray Hill or College Point, we usually have the part on hand the same day.
FAAC and BFT operators show up frequently on New York commercial and multifamily gates, especially in Midtown Manhattan and Long Island City. Linear operators are common on older apartment buildings. Whether you have one of these brands or any other make, we can diagnose it, quote it in writing, and repair it. If you’re not sure what operator is on your gate, call us and read the label on the control box. We’ll tell you what you’re looking at.
Signs You Need a Pro Right Now
- The gate stops halfway or reverses for no reason. This usually means the safety photo eye is obstructed or failing, or the limit switches have drifted. A gate that reverses unpredictably is a pinch-point hazard, especially around kids and pets, and it will get worse.
- The gate makes a grinding or squealing noise every time it opens. That’s metal on metal, usually a dry or failing roller, hinge, or gearbox. Ignoring it turns a $200 roller replacement into a $700 motor and gear rebuild.
- The gate is sagging or dragging on the driveway. A dragging gate is putting all its weight on the leading edge, which stresses the frame, the hinges, and the operator. The longer it drags, the more things fail.
- The remote works sometimes but not every time. Intermittent operation usually points to a failing receiver, a weak battery in the antenna circuit, or a control board that’s starting to go. It will eventually stop working on a day you really need it.
- The gate stays open or won’t close at all. If the gate is stuck open, your property is open too. In New York, a gate that won’t close is a security problem the same day, not next week.
Our Process, Step by Step
When you call Portcullis Gate Repair New York, here’s exactly what happens, from Dean Prescott’s first answer to the final walkthrough.
- 1
You call and a live person answers. No voicemail tree, no callback queue. We ask what the gate is doing, what brand it is if you know, and we give you a real arrival window. Calls are answered 24/7, including holidays.
- 2
The technician arrives in uniform, on time. You’ll know the tech’s name before the truck pulls up. We arrive in the window we gave you, inspect the gate, and diagnose the exact failure. We test the operator, the safety devices, and the structural hardware.
- 3
You get a written price before any work starts. Not a verbal estimate, not a range, not a “we’ll see what we find.” A written dollar amount for the repair, on the spot, covering parts and labor. If you decline, you owe nothing for the visit.
- 4
We do the work and clean up. We repair the gate, test it through full open and close cycles, and then we remove our debris, packaging, and welding slag. The job site is cleaner than when we arrived.
- 5
You get the written Kingswell Guarantee. Every repair invoice from Portcullis is stamped with the 365-Day Done Right Promise. If the repair fails within 365 days, we come back and fix it at no charge. That’s not a warranty claim process. That’s a phone call.
How Much Does Gate Repair Cost in New York?
Most gate repairs in New York run between $180 and $900, depending on what failed and what kind of gate you have. Here’s a quick breakdown by scenario: a typical latch or hinge repair on a New York gate runs $180 to $350. A standard driveway gate actuator or circuit board replacement runs $325 to $650. Structural work like gate welding, post replacement, or sliding gate track repair runs $250 to $700. Full commercial operator replacement can run higher, and we’ll tell you the number in writing before any work begins.
What affects the price most is the operator brand, the gate’s weight and construction, and whether we can repair a component or must replace it. To avoid overpaying, insist on a written price before any work starts and refuse any quote that’s only given verbally after disassembly. Our free estimates include the diagnosis, the written price, and the written Kingswell Guarantee on any repair we do. Call (845) 259-0242 for an exact quote on your New York gate repair. Estimates are free, and the price we quote is the price you pay.
Our Service Area Near New York
Portcullis Gate Repair New York serves the entire five boroughs and surrounding neighborhoods. We regularly repair gates in Manhattan, East New York, Midtown Manhattan, Brooklyn Heights, the Upper West Side, the Upper East Side, Murray Hill, Jackson Heights, Middle Village, College Point, and Long Island City. Typical response times run same-day or next-day for most of our New York service area. For more on the neighborhoods we cover, see our page on Gate Repair in New York, Gate Repair in East New York, and Gate Repair in Manhattan.
Serving New York, NY - Our Local Coverage Area
We’re based in the New York area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions About Gate Repair in New York
Gate repair is the diagnosis and correction of any failure that prevents a gate from opening, closing, latching, or operating safely. That includes the mechanical structure (hinges, posts, rails, welds), the hardware (latches, locks, rollers), and the automation (operators, circuit boards, remotes, safety sensors). Portcullis Gate Repair New York handles all three, and every repair is quoted in writing and backed by the 365-Day Done Right Promise. Call (845) 259-0242 for a free estimate.
Most gate repairs in New York are completed in a single visit of one to three hours, depending on the failure. Structural work like welding or post replacement may take a few hours longer because the material needs time to cool or cure. We’ll give you a realistic time estimate along with your written price before any work starts.
Most gate repairs in New York run between $180 and $900. Simple latch or hinge repairs start around $180, operator and circuit board replacements run $325 to $650, and structural or welding work runs $250 to $700. The exact price for your gate depends on the operator brand, the gate’s construction, and whether parts can be repaired or must be replaced. Call (845) 259-0242 for a free written estimate.
Yes. Portcullis Gate Repair New York technicians are trained on LiftMaster, FAAC, BFT, and Linear operators, plus five other major brands. We stock common components for all four on our trucks, so a LiftMaster circuit board or FAAC actuator replacement in New York can often be completed the same day.
Yes. A gate stuck open in New York is a security problem, not a scheduling matter. Our phones are answered by a live person 24 hours a day, 7 days a week, and we can dispatch a technician for urgent repairs. Call (845) 259-0242 and tell us what the gate is doing. We’ll tell you what to expect and when.
Every repair from Portcullis Gate Repair New York carries the 365-Day Done Right Promise, which is written on your invoice. If the repair fails within 365 days, we return and correct it at no charge, including the visit. That warranty is a written commitment from our Kingswell Guarantee, not a verbal promise.
Clear the area around the gate on both sides so the technician can access the hinges, operator, and control box. If the gate has a control panel inside the house or garage, that’s fine. Have the model number or a photo of the operator if you can. You don’t need to disassemble anything, and you shouldn’t try to force the gate open or closed before we arrive. A technician will handle everything once we get there.
Schedule Your Gate Repair Service in New York Today
A gate that isn’t working is a problem that doesn’t fix itself. Call Portcullis Gate Repair New York at (845) 259-0242 for a free, no-obligation estimate. You’ll get a live person, a written price before any work starts, and the 365-Day Done Right Promise on every repair. Dean Prescott and our New York team answer around the clock. Call today.
Written by Dean Prescott, Owner at Portcullis Gate Repair New York, serving New York since 2008.