Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHinge & Post Repair in New York, NY
Hinge and post repair in New York typically costs between $180 and $650 depending on whether we’re fixing a bent leaf hinge, re-setting a leaning post, or replacing a rotted post entirely. Most jobs are completed same day. If your gate drags on the ground, won’t latch, or sags visibly toward the latch side, the hinge and post are almost always where the problem starts, and our Gate Repair in New York team handles these repairs more often than any other single issue we see.
At Portcullis Gate Repair New York, we’re an independently owned Kingswell company serving every borough and the surrounding counties. Dean Prescott has run this location since 2008, and every hinge or post repair we do carries the same written promise: a price before we start, a real arrival window, a clean job site, and a 365-Day Done Right Promise on the repair. If the repair fails inside that year, we come back and fix it at no charge. Call us at (845) 259-0242 and a live person picks up, any hour, any day.
When You Need Hinge & Post Repair
Post and hinge failures don’t announce themselves with a bang. They show up gradually, and most New York homeowners notice one of these symptoms first:
- The gate scrapes or drags along the bottom edge – In older neighborhoods like Riverdale or Forest Hills, frost heave and decades of soil settlement push posts out of plumb, and the gate’s swing arc starts eating into the ground.
- The gate sags away from the hinge side – A gate that drops two or three inches at the latch end usually means a hinge leaf has bent, a weld has cracked, or the post itself is leaning under the gate’s weight.
- The latch no longer lines up with the receiver – When the latch bar hits the receiver plate half an inch high, brute-forcing the gate shut only bends hinges faster. This is one of the most common calls we get after a hard winter.
- The post wiggles when you push the gate – If you can rock the post by hand, the footing has failed or the wood inside a decorative sleeve has rotted. In clay-heavy soil, which much of Queens and Brooklyn sits on, this happens faster than most people expect.
- The gate swings open or shut on its own – A gate that drifts means the hinge line is no longer vertical. The gate is finding the downhill side and going there.
- Loud creaking or popping at the hinge point – Worn hinge bushings, rusted barrel hinges, or a post that has shifted under load. On LiftMaster and FAAC automated systems, a popping hinge can also trip the obstruction sensor and stop the gate mid-cycle.
None of these get better by waiting. Each swing of a sagging gate adds load to the hinge, and each week of leaning puts more rotational force on the post footing. What starts as a $50 hinge adjustment can become a $600 post replacement if it’s left alone through a full season.
Our Hinge & Post Repair Process
Here’s how we work on every hinge and post job in New York, from a small walk-gate in Park Slope to a heavy automated driveway gate in Westchester:
- You call – a person answers. You reach the office directly at (845) 259-0242. No callback queues. We collect the basics: gate material, swing or slide, how long the problem has been present, and whether an opener is attached.
- We quote a written window and a diagnostic fee. Before the truck rolls, you know what the visit costs and when we’ll be there. That arrival window is a real commitment, not a four-hour range that slips.
- The technician assesses the hinge line and post footing. We check plumb, level, the condition of the hinge barrel and leaf, any weld points, and the post set – concrete footing condition, rot at the soil line, and whether the post is actually set deep enough for a gate of that weight.
- You get a written price before any bolt is turned. We give you the repair cost in writing, broken down by line item: post reset, hinge replacement, weld repair, steel sleeve, whatever is actually required. You approve it. No disassembled gate held hostage at a surprise price.
- We execute the repair and clean up. Whether it’s a cut-and-replace hinge, a weld-on plate, or digging out and re-setting a post in new concrete, we leave the area cleaner than we found it, per the Kingswell Guarantee.
- You receive a written guarantee. Every invoice carries the 365-Day Done Right Promise. If the hinge or post fails inside a year, the return visit is free and the correction is no charge.
Hinge & Post Repair Pricing in New York
Here’s the honest range. Most hinge and post work in the New York metro falls inside these numbers, and you’ll have our written price before we start, not after the gate is in pieces:
- Hinge adjustment or tightening: $75 – $150. A basic fix when the hinge is sound and the post hasn’t moved.
- Single hinge replacement (cut and fit): $120 – $260. New hinge of the correct load rating, fitted to the post and gate leaf, with the gate re-hung and aligned.
- Weld-on hinge repair or weld repair to an existing hinge: $150 – $350. For cracked welds or broken hinge leaves on steel and iron gates, common on older properties throughout Brooklyn and Staten Island.
- Post straighten and re-set: $250 – $500. Digging down to the footing, pulling the post back to plumb, resetting in fresh concrete with proper curing time.
- Full post replacement (wood or steel, including new footing): $400 – $750. When the post is rotted through at the soil line or bent beyond salvage. The higher end includes setting a new post for a heavy driveway gate.
What actually drives cost is the post – how deep it was set originally, what kind of soil and drainage it’s sitting in, and whether the old concrete can be preserved or has to be broken out. In neighborhoods with older stock, like Ditmas Park or certain parts of the Bronx, we frequently encounter posts sunk in two feet of concrete that was mixed thin and never should have held a gate at all. Repairing that properly means a new footing, and the price has to reflect it. The estimate is always free, and it’s always in writing before we begin.
FAQs – Hinge & Post Repair
How much does hinge repair cost in New York?
Hinge repair in New York runs from $75 for a simple adjustment up to about $350 for a weld-on repair of a cracked hinge on a steel gate. A full hinge replacement with re-hanging typically falls between $120 and $260. The exact price depends on the gate’s weight and material, and you’ll have a written number before any work begins. Call (845) 259-0242 for an exact quote – estimates are free.
Is it cheaper to repair a gate hinge or replace the whole gate?
Repairing a hinge is almost always cheaper than replacing a gate, often by thousands of dollars. A hinge replacement, post re-set, or weld repair runs between $75 and $750 in New York, while a new driveway gate can start above $1,500 and climb steeply for custom iron work. If the gate leaf itself is sound, the hinge is the cheaper repair by a long margin. Call (845) 259-0242 and we’ll tell you honestly whether the gate is worth saving.
Can you fix a leaning gate post without replacing it?
Yes, in most cases we can straighten and re-set a leaning post by digging down to the footing, pulling the post back to plumb, and anchoring it in fresh concrete. This runs $250 to $500 in New York depending on soil and post depth. If the post is rotted or bent, replacement is the stronger repair, and we’ll tell you that plainly before you spend a dollar.
Can you come today if my gate is hanging by a hinge?
Call (845) 259-0242 and a live person will tell you exactly when we can arrive. We maintain same-day availability for hinge failures across New York whenever the schedule allows, because a gate resting on one hinge is a genuine safety issue, especially with children or pets on the property.
Why New York Homeowners Call Portcullis for Hinge & Post Work
Dean Prescott has been running this location since 2008, and the work we do is only as good as the guarantee behind it. That’s why every repair carries the 365-Day Done Right Promise, written on the invoice. If the hinge or post repair fails within that year, the return visit costs nothing and the correction costs nothing. We don’t ask you to trust a handshake. That’s the Kingswell Way: say the price before the work, show up in the window we gave you, leave the job site cleaner than we found it, put the guarantee in writing, and come back if it fails.
Our technicians are background-checked and arrive in uniform. They service nine gate-operator brands – including LiftMaster, FAAC, BFT, and Linear – so when a sagging hinge is throwing off an automated system’s sensor alignment, the same technician who fixes the hinge understands what it’s doing to the lock and opener. No second truck, no second appointment.
Every Portcullis location is independently owned and operated, but held to the identical Kingswell Guarantee. It’s not a franchise slogan. It’s a written promise, and it’s been the same since 2008.
If your gate is sagging, dragging, or the post is leaning, call (845) 259-0242. You’ll speak to a live person who can book a real arrival window and a free estimate. We’ll give you the written price before the first bolt is turned – and we’ll stand behind the repair for a full year.
Written by Dean Prescott, Owner at Portcullis Gate Repair New York, serving New York.