Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in SoHo, NY
We’re Portcullis Gate Repair, a Kingswell company serving SoHo with gate repair, installation, and electric operator work. SoHo is not like other Manhattan neighborhoods. The cast-iron loft buildings, cobblestone streets, and Landmarks Preservation Commission oversight mean a gate that looks simple from the curb often involves historic fabric, custom hardware, and a repair approach that respects both the structure and the district’s rules. We give every customer a written price before any work starts, and a live person answers our phone around the clock at (845) 259-0242.
Why SoHo Homes Are Different
Most gates fronting SoHo’s cobblestone streets are original 19th-century cast iron or ornate steel, protected by the Landmarks Preservation Commission. A repair here is a preservation act, not just a mechanical fix. When a hinge on a Greene Street loft gate begins to sag, the correct fix often means hand-forged or custom-machined replication of the original hardware rather than an off-the-shelf part from a supply catalog. The Commission expects repairs to match historic fabric, which means material choice, finish, and even the profile of a replacement picket can matter.
SoHo’s coastal humidity and salt air accelerate rust on wrought iron and cast iron. Seasonal temperature swings make metal expand and contract, loosening hinges and shifting alignment over time. Winter de-icing salts splashed up from sidewalks eat away at lower gate sections and base plates. Dense masonry construction on converted warehouse buildings leaves little room for non-invasive anchoring, so a proper SoHo gate repair has to understand load-bearing walls and what the structure will tolerate. This is not a neighborhood where a generic fix holds up.
Styles & brands we work with
Our Main SoHo Services
The two calls we get most from SoHo homeowners are a gate that has stopped swinging or closing properly, and an electric operator that has failed or become unreliable. Each service has its own SoHo page with local detail.
Gate Repair in SoHo
A sagging cast-iron gate on a landmarked SoHo loft usually means worn hinge barrels, rusted pivot points, or a dropped corner from decades of use. We’re familiar with the tell-tale creak and sag of original 19th-century hinges on Greene Street, where hardware often needs hand-forged replication rather than a modern replacement. We inspect the full assembly, quote a written price, and make the repair with materials that match the district’s historic character. Read more on our Gate Repair in SoHo page.
Gate Installation in SoHo
New gate work in SoHo almost always involves the Landmarks Preservation Commission when the opening faces a protected street. We coordinate the paperwork, specify hardware and finishes that fit the cast-iron district, and anchor using methods that respect 19th-century masonry. Whether it’s a replacement for a rusted-out iron gate or a new steel security gate at a side alley, the job is measured, ordered, and scheduled. See what’s involved on our Gate Installation in SoHo page.
Electric Gate Repair in SoHo
Electric operators on SoHo’s older loft gates are usually retrofits bolted to historic iron. The challenge is making the automation work without altering protected fabric or overloading aging hinges. We service the operator, the safety edges, and the control boards, and we diagnose whether the problem is the motor, the wiring, or the gate itself binding against the frame. Details are on our Electric Gate Repair in SoHo page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service in SoHo
Our SoHo technicians are trained on LiftMaster, FAAC, BFT, and Linear operators, among others. We stock common control boards, remote receivers, and safety-edge components locally so most repair calls don’t wait on freight. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in SoHo, NY
| Service | Typical range in SoHo |
|---|---|
| Hinge replacement on a cast-iron loft gate (pair) | $240 – $520 |
| Gate alignment and re-hang | $180 – $400 |
| Rust treatment and spot fabrication for a bottom rail | $300 – $650 |
| Hand-forged replication of a single hinge strap | $150 – $350 per hinge |
| Swing-gate actuator swap (residential) | $430 – $900 |
| Control board replacement on a FAAC or BFT operator | $280 – $620 |
| Safety-edge replacement (electric gate) | $190 – $380 |
| Full operator and receiver replacement (residential swing) | $950 – $1,800 |
| Landmark-consultation coordination and filing support | $150 – $400 |
| Full new steel security gate, measured and installed | $2,800 – $7,500 |
What pushes a SoHo gate price up is usually the historic fabric: hand-forged hardware, custom fabrication to match an original profile, and the extra time it takes to work within Landmarks Commission requirements. Every price is written down and agreed before we turn a single bolt.
Neighborhoods We Serve in SoHo
SoHo is compact, but the gate work shifts block by block. We serve the full district and the streets where landmark oversight is strictest.
- Greene Street – original 19th-century hinges and hand-forged hardware
- Mercer Street – converted warehouse lofts with heavy street-level iron
- Broome Street – mixed cast iron and steel gates, heavier salt exposure near the curb line
- Prince Street – ornate ironwork on some of the district’s oldest buildings
- West Broadway – wider frontages with larger gate spans and heavier operators
Response time for most SoHo repair calls is same-day or next-morning, depending on when the call comes in and parts availability for any operator brand involved.
Service Area – Cities Near SoHo
We also serve nearby Manhattan neighborhoods and surrounding areas, including New York, NY, East New York, NY, Manhattan, NY, and Midtown Manhattan, NY. Dispatch and scheduling are coordinated from our New York City office; crews serve SoHo locally.
Serving SoHo, NY - Our Local Coverage Area
We’re based in the SoHo area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Company in SoHo
Most SoHo repair calls get a same-day or next-morning arrival window, depending on when you call and whether we need a specific operator part. We give a real arrival window, not a four-hour “sometime” range. Call (845) 259-0242 and a live person will schedule you.
It depends on the scope. In-kind repairs to existing hardware usually proceed without a filing, but any visible change to the gate or its mounting on a protected street frontage will likely need Commission review. We’ll tell you what applies to your building before any work begins.
We quote every job in writing before work starts. For more involved SoHo repairs we typically need to see the gate in person first, and that visit is free. The price you sign is the price you pay, with no door-step increases.
If you need gate work in SoHo, call Portcullis Gate Repair at (845) 259-0242 for a free estimate. We answer live, 24 hours a day, and every repair carries our 365-Day Done Right Promise in writing.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What SoHo Customers Say
"Gate wouldn't respond to the remote or the keypad. Turned out to be the control board. They had the part and swapped it the same visit. Quoted it first, no surprises."
- Everett Shaw"Gate was dragging and screeching across the driveway. I figured I'd need a whole new setup. He adjusted the track and rollers and it was a fraction of what I expected. Honest work."
- Omar Haddad"Our intercom and gate motor both quit. They fixed the whole system in one visit and explained the warranty clearly. On time, polite, and tidy. Can't ask for more."
- Yvette Marchetti