Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Installation Across Sunset Park
A full gate installation in Sunset Park typically runs $1,800 – $6,500 depending on whether we’re hanging a single pedestrian gate or setting a motorized sliding driveway gate with new footings. Most jobs take one to two days once materials are on site. Call (845) 259-0242 and we’ll give you a written price before any work starts.
Sunset Park’s rowhouses, shared driveways, and salt-laden air from New York Harbor create installation conditions you won’t find in a generic online guide. We work here every week. We know which blocks need galvanized steel and which need a sliding track instead of a swing arc. If you’re on 39th Street off 5th Avenue or down near the old Bush Terminal piers, the gate we build for you has to match the street, the slope, and the salt. That’s the job, and we do it the Kingswell Way: a written price, a real arrival window, a clean site, and a written guarantee on every installation.
Why Portcullis Gate Repair New York Is Sunset Park’s Preferred Gate Installation Company
We’re an independently owned Kingswell location, run by Dean Prescott and a crew of background-checked, uniformed technicians who know Sunset Park’s housing stock by block. That matters in a neighborhood where gate work spans everything from original 1890s wrought iron at a brownstone stoop to a powder-coated aluminum security gate at a 6th Avenue walk-up. One crew, one standard, every job.
Sunset Park homeowners keep calling us because we answer the phone around the clock with a live person, not a voicemail tree. We arrive in the window we gave. And when the job is done, the guarantee is printed on the invoice, not promised over the phone. If a gate we installed fails within 365 days, we come back and correct it at no charge. That’s the 365-Day Done Right Promise, and it’s the same written promise at every Kingswell location, including ours here in New York.
Dean Prescott has built the New York team around one idea: a customer who has been burned once by a gate company never wants to wonder whether the next one will show. We show. We price first. We stand behind it.
Styles & brands we work with
Driveway Gate Installation in Sunset Park
Driveway Gate Installation in Sunset Park almost always starts with a question about space: how much room does the gate need to swing, and where does that arc land? On a shared driveway between two brick rowhouses, a swing gate’s arc often crosses into the neighbor’s stoop or blocks the sidewalk. That’s why we measure the actual swing radius before recommending anything.
A typical driveway gate installation in Sunset Park runs $2,400 – $6,500. That includes new post footings, the gate itself, hinges or track, and labor. Posts set in sloped sidewalk areas need deeper footings, usually 42 inches or more, to survive freeze-thaw cycles without leaning. We quote that depth before we dig, not after we discover the slope.
Shared driveways and swing clearance
On many Sunset Park blocks, attached rowhouses share a single driveway cut. A swing gate installed without measuring the neighboring stoop will hit brick within a season. We’ve corrected enough of those to know that a sliding gate is often the only workable answer on shared drives.
Corrosion-resistant steel by the waterfront
Within four blocks of the old Bush Terminal piers, standard steel rusts measurably faster than it does uphill toward 6th Avenue. For Driveway Gate Installation there, we routinely spec galvanized or powder-coated steel frames and stainless hardware. It costs more up front than bare steel, but it keeps a gate square and opening smoothly for twice as long.
Sliding Gate Installation in Sunset Park
Sliding Gate Installation in Sunset Park is the practical fix where a swing gate physically cannot work: narrow shared driveways, sloped sidewalks, or a driveway that runs close to the street. A sliding gate moves on a track and needs no swing arc, so it keeps the sidewalk clear and doesn’t encroach on the neighbor’s stoop.
A sliding gate installation in Sunset Park typically runs $3,200 – $6,500 with a motor, track, footings, and labor. Basic cantilever or rack-and-pinion slide systems start lower, but in this neighborhood the real cost is often in the footings and the track spec. Salt air near the harbor corrodes standard steel rack and pinion tracks in under five years, so we quote galvanized or powder-coated track where it’s needed, not bare steel.
Rack and pinion tracks on sloped ground
Sunset Park’s grid slopes toward the harbor. A track that isn’t set level binds mid-slide, and the operator motor burns out pushing against a seized carriage. We set slide tracks on adjustable stands and check level with a laser before the gate ever hangs.
UL 325 entrapment protection included
Every motorized sliding gate we install in Sunset Park includes UL 325 entrapment protection: safety photocells that stop and reverse the gate if a child, a pedestrian, or a car breaks the beam. It’s not an add-on. It’s federal code for any automated gate, and a gate without it is dangerous.
Trusted Brands We Service in Sunset Park
We install and service LiftMaster, FAAC, and BFT operators on Sunset Park gates, and we stock common replacement parts locally so we’re not waiting on a distributor when your gate is down. LiftMaster dominates residential driveway systems in this neighborhood, FAAC shows up often on commercial entry gates along 4th and 5th Avenues, and BFT hydraulic operators are common on heavier steel gates. Our technicians are certified across all three lines plus six other major brands, so the person who arrives already knows the specific operator on your property.
Common Gate Installation Problems We See in Sunset Park Homes
- Shared driveways with no swing room. Two rowhouses share one driveway cut, and a swing gate’s arc hits the neighbor’s stoop or blocks the sidewalk. We convert these to sliding gates or adjust the hinge geometry so the gate parks without encroaching.
- Heaving post footings from freeze-thaw cycles. Sloped sidewalks along Sunset Park’s grid hold water, and when it freezes, it lifts post footings. Gate posts lean within two winters, hinges bind, and the gate drags. We set footings below frost line, at 42 inches or deeper, and use gravel drainage so posts don’t move.
- Rusted rack and pinion tracks near the harbor. Salt air off New York Harbor attacks bare steel track in under five years. Gates stick mid-slide, operators burn out, and the whole system fails. We quote galvanized or powder-coated track on any waterfront installation.
- Original cast-iron gates past saving. Many Sunset Park brownstones have 1890s wrought-iron gates that look solid but are rusted through at the hinges or the base. Sometimes we restore them; sometimes a replacement steel gate is the only safe answer. We’ll tell you which, and why, before any work begins.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Installation in Sunset Park, NY
Gate installation prices in Sunset Park break down by the size of the job. A single pedestrian gate at a stoop or side yard runs $900 – $2,200. A driveway gate without a motor runs $1,800 – $3,800. Add a gate operator and controls, and most driveway systems land between $3,200 and $6,500. Sliding gates cost more than swing gates because the track and footings add labor. Waterfront blocks cost slightly more because we spec corrosion-resistant steel and stainless hardware. What affects the final number: gate length, post depth, whether we need to remove an old gate, and whether the site needs a sliding conversion. Every Sunset Park quote is written, signed, and agreed before any work starts. Call (845) 259-0242 for a free estimate on your gate installation.
We Also Serve Cities Near Sunset Park
Our crews handle Gate Installation throughout the borough and into nearby neighborhoods. If you’re in New York, East New York, Manhattan, or Midtown Manhattan, we’re already working those blocks and can schedule a written estimate the same way we do here in Sunset Park. Same Kingswell Guarantee, same live person on the phone, same written price before any work.
Serving Sunset Park, NY - Our Local Coverage Area
We’re based in the Sunset Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Installation in Sunset Park
Salt-laden air from New York Harbor accelerates corrosion on steel gates and tracks within four to five blocks of the waterfront, so gates near the old Bush Terminal piers rust faster than those uphill toward 6th Avenue. Our installers spec galvanized or powder-coated steel and stainless hardware on any new gate in that zone. If your gate is already showing rust scale or binding, call (845) 259-0242 and we’ll tell you whether restoration or replacement makes more sense.
Usually not, because a swing gate’s arc crosses into the neighbor’s stoop or blocks the public sidewalk on most shared driveway cuts in Sunset Park. We measure the actual swing radius before recommending anything, and in most shared-drive situations we convert to a sliding gate that rides parallel to the building line and keeps the sidewalk clear. Call (845) 259-0242 for a free measurement and written recommendation.
We set up a temporary walkway with safety photocell protection and keep vehicle access open whenever possible, exactly as we did on 52nd Street between 3rd and 4th Avenues where we replaced a rusted swing gate at a two-family brick rowhouse. Pedestrian traffic to the basement apartment kept moving through a protected walkway the entire time. Every installation includes a site plan for access before we start.
UL 325 is the federal safety standard that requires motorized gates to stop and reverse if a person, child, or car breaks the safety beam, so the gate never closes on someone. Every automated gate we install in Sunset Park includes safety photocells and force sensors as standard. A gate without UL 325 protection is both illegal and dangerous, and we won’t install one without it.
Many driveway gate installations in Sunset Park require a permit from the NYC Department of Buildings, especially when new footings are being poured or an electric operator is being added. We handle permit applications as part of the installation and include the filing fees in your written quote. Call (845) 259-0242 and we’ll tell you exactly what your specific block and property require.
Get a Free Written Estimate for Gate Installation in Sunset Park
If you need a new gate in Sunset Park, call (845) 259-0242 now. You’ll speak to a live person, not a voicemail tree. We’ll schedule a measurement, give you a written price before any work starts, and stand behind the installation with the 365-Day Done Right Promise. Dean Prescott and the Portcullis Gate Repair New York team are ready to build a gate that holds up to Sunset Park’s salt air, sloping sidewalks, and tight shared driveways.
Written by Dean Prescott, Owner at Portcullis Gate Repair New York, serving Sunset Park since 2008.